Clutching

 
1 - 21 of 21 items
Sort By:
2016+ Polaris Secondary Helix 2018+ Ranger 1000 Clutch kit (new body style)
2016+ Polaris Secondary Helix2018+ Ranger 1000 Clutch kit (new body style)

These custom helixes fit the stock secondary on the 2016+ RZR 1000XP, RZR 900, and many ATV models with factory EBS using the Team Boss secondary. Make your machine more responsive in all conditions and much less prone to RPM and top-end power...

With nearly 30 years of CVT tuning experience, we have released our new clutch kits for the new body ranger 1000! These kits are not desiged for the guy just looking to go faster after removign the speed limiter in teh ecu. They are for the guy...

$100.00

$309.00

Clutch Alignment Bar - Universal Clutch Spring Compressor Tool
Clutch Alignment Bar - UniversalClutch Spring Compressor Tool

*The only alignment bar capable of aligning all offsets on all snowmobiles and ATV’s. *Easy to use, no tools required *Can align engine alignment on most machines using the removable center adaptor *High resolution graphics and oil...

*Removes all primary and secondary clutch springs *Works on all Arctic Cat, Polaris, Ski-doo, Yamaha, Primary and most secondary’s, Including TEAM. *Removes Arctic Cat Diamond Drive Springs *Can bolt directly to bench or fit in any standard vise.

$89.95

$89.95

Delrin washers Gates G-Force Belt - Polaris 27C4159
Delrin washersGates G-Force Belt - Polaris 27C4159

The compression spring in the TEAM® roller clutch has to rotate in the spring pocket as the clutch shifts. You can greatly reduce the scrubbing friction of the spring with the Delrin washer kit. Slippery Delrin washers go on top and bottom of...

 HD Carbon fiber belt. Replaces OEM for all years of RZR 1000 and Ranger 1000

$10.00

$119.00

New body Ranger 1000 helix Polaris Boss Secondary Rollers
New body Ranger 1000 helixPolaris Boss Secondary Rollers

Custom helix for the 2018+ new body range iwth the P90X clutches. Cust specifically to match our tunign and clutch kits. Please indicate tune stage and tire size in teh special instructions so we can pick the correct angle for your needs.

Upgrade and replace the square sliders in your stock Polaris secondary for 2016+ RZR 1k, General, and many others. The factory square sliders create more friction and cause slower shift response and accelerated wear of the secondary clutch. THhse...

$110.00

$20.00

Polaris Primary Clutch Puller PCP-8 Polaris Secondary spring- Silver / Orange
Polaris Primary Clutch Puller PCP-8Polaris Secondary spring- Silver / Orange

PCP-8 (PCP8) Fits: ATV/UTV Polaris Model Replaces OE # 900 RZR S, 900 RZR XC, 900 trail (all models), 900 RZR XP (all models) 900 Ranger (all models) 1000 RZR (all models) 2872085 Snowmobile Polaris Model Replaces OE # 4 stroke models 2006-08...

Fits Boss secondary clutch 2016+ and all ranger 900 without EBS. May fit other models too.  Rate 100/200

$64.95

$40.00

Polaris Team Tied Secondary Rollers QSC Ranger 900 / 1000 R2-5 Adjustable Weights
Polaris Team Tied Secondary RollersQSC Ranger 900 / 1000 R2-5 Adjustable Weights

Upgraded replacedment rollers for Team Tied secondary clutches. 

Sold each


QSC's new R2-5 adjustable weights designed specifically for the Ranger 900 and 1000. These weights have a raised heel to close the gap in the primary sheave to belt clearance. That gives you a smoother and more positive belt engagement. The 5...

$25.00

$229.00

QSC Rev-X Primary Clutch - Ranger 1000 to 2018 QSC Silver/Green primary spring
QSC Rev-X Primary Clutch - Ranger 1000 to 2018QSC Silver/Green primary spring

THE QSC REV X PRIMARY CLUTCH IS THE TOP DOG FOR PERFORMANCE CLUTCHES. MADE FROM 6061 ALUMINUM ON THE MOST ADVANCED CNC EQUIPMENT AVAILABLE. EVERYTHING WAS DONE RIGHT ON THIS LATEST DESIGN. THE PRIMARY CLUTCH TAKES A TON OF ABUSE FROM THE MOTOR....

QSC primary spring forthe QSC, Polaris, Can-Am, and Kawasaki primary clutches.

 

$1,095.00

$40.00

Ranger 1000 Clutch kit - Old body style Razorback Belt Temp Gauge
Ranger 1000 Clutch kit - Old body styleRazorback Belt Temp Gauge
Our custom built clutch kits are the absolute best on the market! Proven winners in many race circuits all around the world. In the Ranger 1000 we use QSC's patentend adjustable weights and custom calibrate them to your machine, it's...

Save money on belts by being able to monitor belt temperature the most accurate way possible. The leading design using an infrared sensor you will not get a more accurate reading. This gauge is equipped with a 15' wire lead so it can be used on 2...

$329.00

$295.00

Silver primary spring Silver/Blue primary spring
Silver primary springSilver/Blue primary spring

QSC primary spring forthe QSC, Polaris, Can-Am, and Kawasaki primary clutches.

 

QSC primary spring forthe QSC, Polaris, Can-Am, and Kawasaki primary clutches.

 

$40.00

$40.00

STM 3VL Primary - 18+ New body ranger 1k STM Rage 3 Primary - Ranger 1000 to 2018
STM 3VL Primary - 18+ New body ranger 1kSTM Rage 3 Primary - Ranger 1000 to 2018

This primary is a direct replacement for the P90 on the 2018+ new body style Ranger 1000 only. Does not fit older models. Rigid reinforced tied tower design for stock or higher horsepower applications to prevent tower spread. This primary...

To take full advantage of an optimal set up we suggest using the STM driven along with the Rage 3. This clutch offers extremely smooth low engagement with improved torque. Big tires or low speed riding is no longer a problem with the STM Rage 3....

$1,310.00

$1,045.00

STM Tuner Secondary - Polaris Ranger
STM Tuner Secondary - Polaris Ranger

The NEW TRIPLE roller option with a 1.25 diameter roller creates a very consistent smooth up shift and backshift with improved roller wear. This latest design creates a huge improvement in engine braking compared to our dual roller tuner. All...

$854.00