1 - 20 of 20 items
Sort By:
Adjustable Weight Hardware Pack Clutch Alignment Bar - Universal
Adjustable Weight Hardware PackClutch Alignment Bar - Universal
Did you purchase a standard clutch kit with no extra hardware? Spill your box in the yard while making an adjustment? Or just need some more screws for adjusting your QSC weights in your Polaris ATV or SxS? This is the set you need! Includes an...

*The only alignment bar capable of aligning all offsets on all snowmobiles and ATV’s. *Easy to use, no tools required *Can align engine alignment on most machines using the removable center adaptor *High resolution graphics and oil...



Clutch Spring Compressor Tool Delrin washers
Clutch Spring Compressor ToolDelrin washers

*Removes all primary and secondary clutch springs *Works on all Arctic Cat, Polaris, Ski-doo, Yamaha, Primary and most secondary’s, Including TEAM. *Removes Arctic Cat Diamond Drive Springs *Can bolt directly to bench or fit in any standard vise.

The compression spring in the TEAM® roller clutch has to rotate in the spring pocket as the clutch shifts. You can greatly reduce the scrubbing friction of the spring with the Delrin washer kit. Slippery Delrin washers go on top and bottom of...



G2-A5 Adjustable Weights Gates G-Force Belt - Polaris 23C3836
G2-A5 Adjustable WeightsGates G-Force Belt - Polaris 23C3836

G2-A5 adjustable weight set for sportsman 570-1000cc ATVs, 570 RZR, and Ranger 570, 700, 800. Includes 3 weights with or without hardware kit. 

Heavy Duty Carbon series upgrade to OEM belt. These high-performance Carbon-fiber reinforced belts provide maximum power-transmission and superior clutch/variator torque-multiplier response for recreational trail-riding or demanding off-road...



Gates G-Force Belt - Polaris 23G3836 Polaris 850/1000 ATV secondary helix
Gates G-Force Belt - Polaris 23G3836Polaris 850/1000 ATV secondary helix

Gates G-Force Aramid ATV and Snowmobile drive belts deliver exceptional CVT transmission performance in a drop-in OEM-upgrade design. These high-performance Kevlar-fiber reinforced belts provide maximum power-transmission and superior...

Custom cut helix for the sportsman and scrambler 850 and 1000 from 2011 up. These are available as both EBS and Non-EBS in several options in custom anlges to match either a stock primary setp or to match our custom RVS clutch kits. Choose on...



Polaris Boss Secondary Rollers Polaris Primary Clutch Puller PCP-12
Polaris Boss Secondary RollersPolaris Primary Clutch Puller PCP-12

Upgrade and replace the square sliders in your stock Polaris secondary for 2016+ RZR 1k, General, and many others. The factory square sliders create more friction and cause slower shift response and accelerated wear of the secondary clutch. THhse...

PCP-12 (PCP12) Fits: Polaris 550 Sportsman XP 4x4 09-15, 550 Sportsman (all models) 10-15, 570 RZR 4x4 12-17, 800 RZR 4x4 (all models) 08-14, 850 Scrambler 13-17, 850 Sportsman XP 4x4 09-17, 850 Sportsman (all models) 09-17 Precise machining for...



Polaris Secondary spring- Silver / Orange Polaris Team Tied Secondary Rollers
Polaris Secondary spring- Silver / OrangePolaris Team Tied Secondary Rollers

Fits Boss secondary clutch 2016+ and all ranger 900 without EBS. May fit other models too.  Rate 100/200

Upgraded replacedment rollers for Team Tied secondary clutches. 

Sold each



QSC Silver/Blue/Red primary spring QSC Silver/Green primary spring
QSC Silver/Blue/Red primary springQSC Silver/Green primary spring

QSC primary spring forthe QSC, Polaris, Can-Am, and Kawasaki primary clutches.

QSC primary spring forthe QSC, Polaris, Can-Am, and Kawasaki primary clutches.




Razorback Belt Temp Gauge Scrambler 1000 Clutch Kits
Razorback Belt Temp GaugeScrambler 1000 Clutch Kits

Save money on belts by being able to monitor belt temperature the most accurate way possible. The leading design using an infrared sensor you will not get a more accurate reading. This gauge is equipped with a 15' wire lead so it can be used on 2...

Our custom built clutch kits are the absolute best on the market! Proven winners in many race circuits all around the world. In the Scrambler 1000 we use QSC's patentend adjustable weights and custom calibrate them to your machine, it's...



Silver primary spring Silver/Blue primary spring
Silver primary springSilver/Blue primary spring

QSC primary spring forthe QSC, Polaris, Can-Am, and Kawasaki primary clutches.


QSC primary spring forthe QSC, Polaris, Can-Am, and Kawasaki primary clutches.




STM Sportsman/scrambler Rage 3 Primary STM Tuner secondary - Sportsman 550/850 - Scrambler 850/1000
STM Sportsman/scrambler Rage 3 PrimarySTM Tuner secondary - Sportsman 550/850 - Scrambler 850/1000
New improved two way bearing design . The main shaft bearing is now smaller with a 45mm outside diameter allowing a lower initial take off ratio than our past design. Allows tighter belt deflection, transmission shifting and belt chirp. A...

All billet construction capable of using compression springs with different spring rate options. We have many helix angles see menu below. We can also provide custom helix angles to your desire for additional fees. We also offer the option of a...