Clutching

 
1 - 20 of 20 items
Sort By:
2016+ Polaris Secondary Helix Clutch Alignment Bar - Universal
2016+ Polaris Secondary HelixClutch Alignment Bar - Universal

These custom helixes fit the stock secondary on the 2016+ RZR 1000XP, RZR 900, and many ATV models with factory EBS using the Team Boss secondary. Make your machine more responsive in all conditions and much less prone to RPM and top-end power...

*The only alignment bar capable of aligning all offsets on all snowmobiles and ATV’s. *Easy to use, no tools required *Can align engine alignment on most machines using the removable center adaptor *High resolution graphics and oil...

$100.00

$89.95

Clutch Spring Compressor Tool Delrin washers
Clutch Spring Compressor ToolDelrin washers

*Removes all primary and secondary clutch springs *Works on all Arctic Cat, Polaris, Ski-doo, Yamaha, Primary and most secondary’s, Including TEAM. *Removes Arctic Cat Diamond Drive Springs *Can bolt directly to bench or fit in any standard vise.

The compression spring in the TEAM® roller clutch has to rotate in the spring pocket as the clutch shifts. You can greatly reduce the scrubbing friction of the spring with the Delrin washer kit. Slippery Delrin washers go on top and bottom of...

$89.95

$10.00

Gates G-Force Belt - Polaris 27C4159 Polaris Boss Secondary Rollers
Gates G-Force Belt - Polaris 27C4159Polaris Boss Secondary Rollers

 HD Carbon fiber belt. Replaces OEM for all years of RZR 1000 and Ranger 1000

Upgrade and replace the square sliders in your stock Polaris secondary for 2016+ RZR 1k, General, and many others. The factory square sliders create more friction and cause slower shift response and accelerated wear of the secondary clutch. THhse...

$119.00

$20.00

Polaris Primary Clutch Puller PCP-8 Polaris Secondary spring- Silver / Orange
Polaris Primary Clutch Puller PCP-8Polaris Secondary spring- Silver / Orange

PCP-8 (PCP8) Fits: ATV/UTV Polaris Model Replaces OE # 900 RZR S, 900 RZR XC, 900 trail (all models), 900 RZR XP (all models) 900 Ranger (all models) 1000 RZR (all models) 2872085 Snowmobile Polaris Model Replaces OE # 4 stroke models 2006-08...

Fits Boss secondary clutch 2016+ and all ranger 900 without EBS. May fit other models too.  Rate 100/200

$64.95

$40.00

QSC Silver/Blue/Red primary spring QSC Silver/Green primary spring
QSC Silver/Blue/Red primary springQSC Silver/Green primary spring

QSC primary spring forthe QSC, Polaris, Can-Am, and Kawasaki primary clutches.

QSC primary spring forthe QSC, Polaris, Can-Am, and Kawasaki primary clutches.

 

$40.00

$40.00

Razorback Belt Temp Gauge RZR 1000 S Clutch kits
Razorback Belt Temp GaugeRZR 1000 S Clutch kits

Save money on belts by being able to monitor belt temperature the most accurate way possible. The leading design using an infrared sensor you will not get a more accurate reading. This gauge is equipped with a 15' wire lead so it can be used on 2...

Our custom built QSC clutch kits are the absolute best on the market! Proven winners in many race circuits all around the world. In the RZR 1000 S we use QSC's patentend adjustable weights and custom calibrate them to your machine, it's...

$295.00

$329.00

RZR 1k / General Team tied upgrade (2016+) Silver primary spring
RZR 1k / General Team tied upgrade (2016+)Silver primary spring

Upgrade from the stock Team BOSS with the square sliders that eat the clutch up to the 14-15 style Team Tied secondary. Has rollers instead of sliders, more efficient design, more durable and better performing. Reuires helix and spring to be...

QSC primary spring forthe QSC, Polaris, Can-Am, and Kawasaki primary clutches.

 

$379.00

$40.00

Silver/Blue primary spring SLP RZR 1K XP Trail Clutch Kit
Silver/Blue primary springSLP RZR 1K XP Trail Clutch Kit

QSC primary spring forthe QSC, Polaris, Can-Am, and Kawasaki primary clutches.

 

SLP clutch kits have been designed and tested to get the most consistent performance out of your Polaris UTV. We have been working with centrifugal clutches for over 40 years, and know how to tune them to transfer your horsepower to the ground....

$40.00

$309.00

STM Rage 3 Primary Polaris RZR 1000 STM Rage 3RS Primary - RZR 1K XP
STM Rage 3 Primary Polaris RZR 1000STM Rage 3RS Primary - RZR 1K XP

Polaris Rage Single-Stage Billet Primary New improved two-way bearing design. The main shaft bearing is now smaller with a 45mm outside diameter allowing a lower initial take-off ratio than our past design. Allows tighter belt deflection,...

To take full advantage of an optimal set up we suggest using the STM driven along with the Rage 3RS. This clutch offers extremely smooth low engagement with improved torque. Big tires or low speed riding is no longer a problem with the STM Rage...

$1,045.00

$1,045.00

STM Rage 6 Primary - RZR 1000 STM Rage 8 - RZR 1K XP
STM Rage 6 Primary - RZR 1000STM Rage 8 - RZR 1K XP

A complete billet design that uses a screw on style spider. Rigid reinforced design for higher horsepower applications. We have designed the Rage III to create more over drive than the stock clutch system. To obtain the proper over drive the...

New improved two-way bearing design. The main shaft bearing is now smaller with a 45mm outside diameter allowing a lower initial take off ratio than our past design. Allows tighter belt deflection, transmission shifting and belt chirp. A complete...

$1,440.00

$1,670.00