Dobeck Gen 3 / 3.5 ATV Fuel Programmers
Click To Enlarge

Less shop time means more ride time. The Electronic Jet Kit (EJK) is the #1 EFI controller on the market for installation time to riding with great performance. Plug and play does not just refer to connectors to make installation easy, but the EJK comes programmed and ready to go for stage 1 (after-market pipe and air cleaner) modifications. Forget downloading maps. Forget looking up settings. The EJK installs in mere minutes and you are off to a better, more powerful, smoother ride.

The EJK evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the EJK is a customizable solution for the shop that wants to take control of their tuning needs.

GEN 3 is the short term used to describe the Generation 3 Electronic Fuel Injection (EFI) controller manufactured by Dobeck Performance. The GEN 3 was released in 2005 under a private label program. The GEN 3 is a piggy-back EFI controller because it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The GEN 3 has a push button interface allowing access up to 6 different modes to allow for quick fine tuning by the end user without needing a computer.

The GEN 3.5 EFI controller is an extension to the GEN 3 controller. The GEN 3.5 technology was released in 2009 also in the DP private label program. The GEN 3.5 controller has the ability to add or pull fuel within each available fueling zone.

View Complete Information at www.ElectronicJetKit.com

 

Arctic Cat
Part Number Type Vehicle  
9310192 GEN 3 Arctic Cat 700 EFI 2007-2011  
9310250 GEN 3 Arctic Cat 425/450 2011-2013  
8310062 GEN 3.5 Arctic Cat 550/700 H1 2008-2013  RECOMMENDED  
9310210 GEN 3 Arctic Cat 550/700 H1 2008-2013  
9320119 GEN 3 Arctic Cat 1000 H2 / Thundercat 2008-2013  
CAN AM
Part Number Type Vehicle  
8310063 GEN 3.5 CAN AM DS 450 2008-2011  
8310073 GEN 3.5 CAN AM DS 450 2012-2015  
9310193 GEN 3 CAN AM DS 450 2008-2015  RECOMMENDED  
8310074 GEN 3.5 CAN AM Outlander 400 2008-2014  
9320101 GEN 3 CAN AM Outlander 500/650/800 2006-2015  RECOMMENDED  
8320059 GEN 3.5 CAN AM Outlander 500/650 2006-2009  
8320061 GEN 3.5 CAN AM Outlander 500/650 2010-2015  
8320059 GEN 3.5 CAN AM Outlander 800 2006-2011  
8320061 GEN 3.5 CAN AM Outlander 800 2012-2015  
8320061 GEN 3.5 CAN AM Outlander 1000 2011-2015  
9320101 GEN 3 CAN AM Outlander 1000 2011-2015  RECOMMENDED  
9320102 GEN 3 CAN AM Renegade 500/650/800 2006-2015  RECOMMENDED  
8320059 GEN 3.5 CAN AM Renegade 500/650 2006-2009  
8320061 GEN 3.5 CAN AM Renegade 500/650 2010-2015  
8320059 GEN 3.5 CAN AM Renegade 800 2006-2011  
8320061 GEN 3.5 CAN AM Renegade 800 2012-2015  
8320061 GEN 3.5 CAN AM Renegade 1000 2011-2015  
9320102 GEN 3 CAN AM Renegade 1000 2011-2015  RECOMMENDED  
CF Moto
Part Number Type Vehicle  
8320141 GEN 3.5 CF Moto CFORCE 800 (TERRALANDER X8) 2015  
Gas Gas
Part Number Type Vehicle  
9110021 GEN 3 Gas Gas Wild HP 450 2003-2006  
Honda
Part Number Type Vehicle  
8310086 GEN 3.5 Honda Rancher 420 2007-2013  
9310194 GEN 3 Honda Rancher 420 2007-2013  RECOMMENDED  
9310272 GEN 3 Honda Rancher 420 2014-2015  
9310194 GEN 3 Honda Foreman 2012-2013  
9310272 GEN 3 Honda Foreman 500 2014-2015  
9310195 GEN 3 Honda Rincon 680 2006-2015  
9310196 GEN 3 Honda TRX 700XX 2008-2009  
Kawasaki
Part Number Type Vehicle  
8320048 GEN 3.5 Kawasaki Brute Force 750 2008-2011  RECOMMENDED  
8320149 GEN 3.5 Kawasaki Brute Force 750 2012-2014  RECOMMENDED  
9320103 GEN 3 Kawasaki Brute Force 750 2008-2014  
9310197 GEN 3 Kawasaki KFX 450 2007-2014  
Kymco
Part Number Type Vehicle  
9310250 GEN 3 Kymco Maxxer 450i 2011-2012  
Polaris
Part Number Type Vehicle  
9310198 GEN 3 Polaris Sportsman 500 2006-2013  
9310199 GEN 3 Polaris Sportsman 550 2010-2014  
8310109 GEN 3.5 Polaris Sportsman 570 2014-2015  
9320107 GEN 3 Polaris Sportsman 700/800 2005-2014  
9320108 GEN 3 Polaris Sportsman 850 2009-2015  
8320094 GEN 3.5 Polaris Sportsman 1000 2015  
9320108 GEN 3 Polaris Scrambler 850 2013-2015  
8320094 GEN 3.5 Polaris Scrambler 1000 2014-2015  
Suzuki
Part Number Type Vehicle  
9310200 GEN 3 Suzuki LTR 450 2006-2011  
9310201 GEN 3 Suzuki Quadsport LTZ400 2009-2014  
9310201 GEN 3 Suzuki King Quad 400 2009-2015  
9310199 GEN 3 Suzuki King Quad 500 2011-2014  
9310199 GEN 3 Suzuki King Quad 450/700/750 2005-2015  
Yamaha
Part Number Type Vehicle  
9310202 GEN 3 Yamaha Grizzly 550 2009-2015  
9310203 GEN 3 Yamaha Grizzly 700 2006-2015  
9310204 GEN 3 Yamaha Raptor 700 2005-2014  
9310280 GEN 3 Yamaha Raptor 700/R 2015-2016  
9310206 GEN 3 Yamaha YFZ 450 2009-2014  
8310048 GEN 3.5 Yamaha YFZ 450 2009-2015  RECOMMENDED  

 

 

NO COMPUTER NEEDED
This EFI controller is one of the only ones on the market which allows a large range of adjustability without the use of a computer. We like to use the term 'on-the-fly' tuning. You can literally drive the vehicle, make setting adjustments, and instantaneously feel the results. Obviously for safety purposes we recommend you pull over to the side before making adjustments. Some after-market EFI controllers like to claim 'on-the-fly' tuning which to them means toggling only between a couple preset maps. The controller actually has 11,390,625 available maps in the unit which are accessible without using a computer program to reprogram the unit. There does exist a computer program called POWERLAB and the controllers can be reprogrammed by a computer, but most users do not require this ability. Why deal with the complexity? It's an Electronic Jet Kit to make fuel injection tuning easy, simple, and fast so you can enjoy more time riding.


  • NO DYNO REQUIRED
    You do not have to be a professional mechanic or tuner and have access to a dynamometer in order to tune your vehicle with the EFI controller. Knowledge and good equipment obviously are a huge plus, but you can do just as good a job and sometimes better by tuning in real world riding situations. The controller allows this by breaking down a drive cycle into very understandable zones to make adjustments. Most controllers have the basic Idle/Cruise, Acceleration, and Full Throttle zones to adjust. Every rider can understand this terminology. The greatest advantage about tuning your vehicle yourself is your ride will be custom set up to your driving style.

  • Plug N' Play Installation - Minutes to Install, Base Settings are Preset
    All of the offered controllers are plug n' play installations and can be done in a manner of minutes instead of hours. All you have to do is locate the OEM injector connections on your vehicle. Most of the time this will only require you to remove a few components to gain access to these injector connections. A number of new applications will also require you to find the O2 connections on your vehicle if present. Power for the unit is gained through the injector connections and a black ground wire just needs to be attached to the negative terminal on the battery if present or by a metal screw onto the vehicle frame. After physically installing the controller in most cases you are all set to go on a test ride. The unit comes pre-programmed for a stage 1 setup for each application. After your initial test ride you then can make some fine tune adjustments which may be required based upon your modifications.

  • Uses Unique Load Based Technology
    The controller uses Load Based Technology which sets it apart from most of the competition. Most EFI controllers use what is called 'Alpha-N' Tuning Technology. Alpha-N tuning is associated with just using Throttle Position (TPS) and RPM as the factors to make tuning adjustments. Load Based Technology differs by using Rate, TPS and RPM as the key factors for adjustment. Load Based tuning allows a user to tune their vehicle for every gear and for all riding conditions. Load can easily be explained by stating that riding up a hill puts more "load" on the vehicle than driving on a flat road, but yet the same TPS and RPM can be achieved in both circumstances.

  • Offers Full Range Tunability
    The controller is sold as an Electronic Jet Kit. Like carburetor jet kits of the past the controller offers a range of adjustability to tune your vehicle. Instead of physical jets and needles the controller has this adjustability built into the unit and can quickly be adjusted while riding the vehicle. Essentially with all EFI vehicles software has replaced some hardware. The controller can be installed and set to actually allow the user to still run a stock configuration, but allows the user to ADD or PULL fuel within easy to understand tuning zones.

  • Does Not Interfere with Stock ECU Operation
    This is a very common feature of all after market EFI controllers, but needs to be stated to reassure all end users. The controller does not trip any engine codes or affect the ECU operation in any way.

  • Simple Push Button Adjustment Interface
    The controller offers 'on-the-fly' adjustment using three push buttons on the label interface. The three buttons are labeled MODE, PLUS, and MINUS. With power supplied to the box by either starting the vehicle or just turning the key on, the adjustment modes are accessed by pressing the MODE button. Light setting changes are then made for each respective mode by pressing the PLUS and MINUS buttons. No extra tools are required to make tuning adjustments.

  • Water-Resistant
    The hardware components within the controller are covered with a substance to make the controller water-resistant. The controller is still an electrical device and without this coating would short-circuit when in contact with water based substances. The controller is NOT 100% water proof, but will continue to function properly through rainstorms, snow, washing your vehicle, etc. Watch this YouTube video

  • 2-Year Warranty
    The controllers come with a two (2) year warranty from date of purchase against original defects in materials and workmanship. Should the controller fail to perform then the manufacturer will repair or replace the unit to the original retail purchaser at no charge except for shipping charges back to the manufacturer. Proof of purchase may be required.
    The controller does NOT void any OEM vehicle warranty. A common mispractice of dealers is to tell customers certain products will void their newer vehicle's warranty. The Magnuson-Moss Warranty Act protects consumers from this practice.
  • Item #: EJK-ATV
  • Manufacturer: Dobeck Performance

Dobeck Gen 3 / 3.5 ATV Fuel Programmers

Price: $225.00
* Marked fields are required.
*
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review